SSC Controls DS100-DG Dual Foot Switch with Guard, Electrical, Momentary Action, Two Pedal, 8-ft Cable with Leads, Twin Pedal, Left/Right, Up/Down, or Forward/Reverse
(as of Apr 15,2021 07:23:33 UTC – Details)
The DS100-DG is a dual foot switch with a tough steel guard. It comes with both pedals pre-wired and a single cable exiting the unit. Each pedal has momentary action and is wired normally open (N.O.), which means that it activates when your foot is on the pedal, and de-activates when you release your foot from the pedal. Electrically, each side is rated 13 amps @ 125/250 VAC. In general, this is used for AC applications; it cannot be used directly to reverse a DC motor. The cable is 8 feet long and is 16 gauge / 4 conductor (16/4) cord, with one wire common to both switches, one wire for the left side, one wire for the right side, and one ground wire. Consult an electrician if you are unsure how to connect the wiring to your device. The foot switches are wired so both switches cannot be operated at the same time (neither will work if both are pressed). Also features a tough cable with a pigtail strain relief and 12-gauge steel guard with rubber bumper feet. Ideal for applications involving forward/reverse, twin pedal, up/down, left/ right, and many more, such as tube and pipe benders, positioners, metalworking, etc. Enclosure rating: CSA/NEMA Type 1 and IEC 60529 IP20. For indoor use in dry environments. CSA Certified to US and Canadian standards. Size: 10.3” L x 6.0” W x 5.6″ H; 8.5 pounds. One year warranty on parts and labor. Made in the USA by SSC Controls Company.
Consists of two foot pedals wired together with a single cable and a tough steel guard.
Each foot pedal has momentary action: press and hold to turn on, release to turn off.
Electrical rating: 13 amps @ 125/250 VAC; SPDT (wired normally open).
Ideal for AC applications involving forward/reverse, up/down, and more.
UL / CSA Certified and Made in USA.